Radius networks radbeacon mobilinc how to#
Radius networks radbeacon mobilinc Bluetooth#
Radius networks radbeacon mobilinc series#

Properly save the file and detach the SD card from your system before ejecting the card, otherwise the card may beĬorrupted. Just paste your UUID in the standardįormat (both uppercase and lowercase letters are acceptable) and enter the other values in decimal format. To change the beacon identifiers simply edit the values for each of these parameters. When you open this file, you should see twoīlocks like the one below, these give the identifiers for each transmitter (Note: changing the second set of identifiersĭoes nothing unless you have the dual model).Įxport UUID1=2F234454-CF6D-4A0F-ADF2-F4911BA9FFA6 Look for a volume with a file named nf in the root directory. Raspberry Pi, then remove the SD card and put it into your computer’s SD card reader. Reader skip to the next section to connect to the Raspberry Pi and edit these values in the console). The easiest way to do this is with a card reader and a computer (if your computer doesn’t have an SD card With the Radius Networks Beacon Development Kit, you can easily customize the identifiers being broadcast by theīeacon. Times per second, which is the setting recommended by Apple engineers. With this feature you can select how often the beacon broadcasts, which will help youĭetermine how your app will respond to beacons with different advertising rates. If youĭecide to use another adapter, you can use Radius Networks’ beacon test apps to find its calibrated power value.īroadcast Frequency indicates how often the beacon will broadcast its advertisement – in times per second

Radius networks radbeacon mobilinc Bluetooth#

Value for the included Bluetooth adapter (-59) so you only need to change this value if using another adapter. The Beacon Development Kit comes preconfigured with the default To calibrate distance estimates from the beacon. Power is a measure of signal strength received by a device one meter from the beacon. The Minor is used to identify an individual beacon within the group. Logical group, like a building or a room. The Major and Minor are both integers that can be between between 5. Radius Networks’ beacon test apps (listed above) also have tools to generate your own You can use any GUID/UUID generation tool (for example: the uuidgen command in OS X) to create your own identifier

Generally, you generate one ProximityUUID to use in all of your organization’s beacons.

Radius networks radbeacon mobilinc series#

The ProximityUUID is a 16 byte identifier, usually expressed as a series of hexadecimal digits separated by dashes. These values are included in theĭefault identifier list in Radius Networks’ beacon test apps so these tools can be used to test The Dual Beacon Development Kit model, it will also transmit as a second beacon with By default, the Beacon Development Kit will transmit with a ProximityUUID of 2F234454-CF6D-4A0F-ADF2-F4911BA9FFA6, Major of 1, and Minor of 1. Proximity beacons using iBeacon™ technology have a three part identifier consisting of ProximityUUID, Major, and Minor.

Radius networks radbeacon mobilinc how to#

Click here for information on how to download these free tools. Use an beacon test program like Radius Networks’ “Locate” (iOS) to verify theīeacon is transmitting. It takes about 60 seconds for it to begin Socket and the computer board, the beacon will start up automatically. As soon as the 5V micro USB adapter is connected to a wall There is no power switch for the Beacon Development Kit. To a wall socket and the micro USB connector on the board. Verify that the SD card and the Bluetooth dongle are properly seated in their sockets, and the power supply is connected If this doesn’t happen, try a different charger. If your charger works, you should see a red LED illuminated when theīoard is powered, and a green LED that flashes intermittently. The Raspberry Pi computerĬan be sensitive to poorly performing chargers. The Beacon Development Kit requires a standard 5V power supply with a micro USB connector. Instructions for the latest version can be found here. Instructions for Version 3.0, Version 2.0, and Version 1.0 are also available.

Note: These instructions are for a previous version of the Beacon Development Kit (3.1). Beacon Development Kit Instructions (Version 3.1)